New Mexico Register / Volume XXXIV, Issue 13 / July 18, 2023

 

 

This is an amendment to 10.25.2 NMAC, Sections 1, 8, and 9, effective 7/18/2023.

 

10.25.2.1               ISSUING AGENCY: [New Mexico Public Regulation Commission.] Department of Homeland Security and Emergency Management.

[10.25.2.1 NMAC - N, 11/15/2007; A/E, 10/7/20222; A, 7/18/2023]

 

10.25.2.8               TYPES OF CERTIFICATES REQUIRED:

                A.            When required. No person shall install, inspect, maintain, service, tag or repair fire protection equipment or systems unless he has obtained a certificate of fitness from the fire marshal in compliance with these rules. Any person holding a certificate of fitness shall have a copy of it available in all service vehicles and offices for review if requested during inspection by the fire marshal or AHJ. Certificates of fitness are not transferable.

                B.            Types of certificates. The fire marshal or AHJ may issue certificates of fitness for installation, inspection, maintenance, repair, recharging or tagging in the following disciplines:

                                (1)           automatic fire suppression systems and fire pumps;

                                (2)           automatic fire detection and alarm systems;

                                (3)           chemical fire suppression systems; [and]

                                (4)           portable fire extinguishers; and

                                (5)           fire and smoke dampers.

[10.25.2.8 NMAC - N, 11/15/2007; A/E, 10/7/2022; A, 7/18/2023]

 

10.25.2.9               APPLICATION PROCEDURE: Any person may apply for a certificate of fitness by submitting the required application to the fire marshal as provided in 10.25.1.9 NMAC or to an AHJ. The mandatory applications described in 10.25.1.9 NMAC are available as indicated in 10.25.1.9 NMAC.

                A.            Information required for initial application. Each application for a certificate of fitness shall include:

                                (1)           the applicant’s name, mailing address, telephone number and signature of authorized representative;

                                (2)           the disciplines for which certification is requested, listed in 10.25.2.8 NMAC;

                                (3)           a statement that the applicant agrees to be inspected by the fire marshal, his designees or an AHJ at any time during normal business hours;

                                (4)           for certification for automatic fire suppression systems and fire pumps: the name of the qualified party, the type and number of his CID license and a copy of his license;

                                (5)           for certification for automatic fire detection and alarm systems: the name of the qualified party, the type and number of his CID license and a copy of his license;

                                (6)           for certification for chemical fire suppression systems: the name of the qualified party, the type and number of his CID license and a copy of his license;

                                (7)           for certification for portable fire extinguishers, a statement indicating that the applicant:

                                                (a)           operates from a fixed location, provides mobile recharging service, or both;

                                                (b)           agrees to allow only trained personnel to maintain, service and recharge portable fire extinguishers; and

                                                (c)           agrees to provide its personnel with all service manuals and documentation, proper tools, recharging materials, lubricants and manufacturers’ recommended replacement parts or parts specifically listed for use in fire extinguishers.

                                (8)           for certification to inspect and test fire and smoke dampers, an application shall include:

                                                (a)           for mechanically actuated fire and smoke dampers, applicants shall provide documentation of a valid NFPA-Certified Fire Protection Specialist certification or of an approved fire and life safety certification from a program accredited by the American National Standards Institute (ANSI).

                                                (b)           for electrically actuated fire and smoke dampers monitored by a fire alarm system, applicants shall comply with requirements of Paragraph (5) of Subsection A of 10.25.2.9 NMAC.

                                                (c)           for fire and smoke dampers with both mechanical and electrical components, the applicant inspecting the mechanical components shall provide documentation pursuant to subparagraph (a) of this paragraph and the applicant inspecting the electrical components shall provide documentation pursuant to subparagraph (b) of this paragraph.

                B.            Requirements for renewal. Any person seeking to renew a certificate of fitness shall apply following the process provided, and submit all information required, for an initial application.

[10.25.2.9 NMAC - N, 11/15/2007; A/E, 10/7/20222; A, 7/18/2023]